| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Interior | Section: Heating/Air Conditioning | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000024BZ00EX |
| Title: HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR (for Rear Side): INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT ROOM TEMPERATURE SENSOR (COOLER (DUCT SENSOR) THERMISTOR)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
10°C (50°F) |
3.00 to 3.73 kΩ |
|
1 - 2 |
15°C (59°F) |
2.45 to 2.88 kΩ |
|
1 - 2 |
20°C (68°F) |
1.95 to 2.30 kΩ |
|
1 - 2 |
25°C (77°F) |
1.60 to 1.80 kΩ |
|
1 - 2 |
30°C (86°F) |
1.28 to 1.47 kΩ |
|
1 - 2 |
35°C (95°F) |
1.00 to 1.22 kΩ |
|
1 - 2 |
40°C (104°F) |
0.80 to 1.00 kΩ |
|
1 - 2 |
45°C (113°F) |
0.65 to 0.85 kΩ |
|
1 - 2 |
50°C (122°F) |
0.50 to 0.70 kΩ |
|
1 - 2 |
55°C (131°F) |
0.44 to 0.60 kΩ |
|
1 - 2 |
60°C (140°F) |
0.36 to 0.50 kΩ |
NOTICE:
- Even slightly touching the sensor may change the resistance value. Be sure to hold the connector.
- When measuring, the sensor temperature must be the same as the ambient temperature.
HINT:
As the temperature increases, the resistance decreases (see the graph).
If the resistance value is not as specified, replace the sensor.
|
|